Home|About Us|Products|Standard|Download|Online Order|Contact Us
Category: 
Standard:
products: 
 
Bolt
Nut
Screw
Anchor
Washer
Rivet&Rivet Nut
Pin
Others
 
 
You are here: Home - Standard

ASTM A194

Scope

The ASTM A194 specification covers carbon, alloy and stainless steel nuts intended for use in high-pressure and/or high-temperature service. Unless otherwise specified, the American National Standard Heavy Hex Series (ANSI B 18.2.2) shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class  2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace and are often substituted for ASTM A563 grade DH nuts due to the limited availability of DH nuts in certain diameters and finishes. 

Grades      
 
2
Carbon steel heavy hex nuts
2H Quenched & tempered carbon steel heavy hex nuts
2HM Quenched & tempered carbon steel heavy hex nuts
4 Quenched & tempered carbon-molybdenum heavy hex nuts
7 Quenched & tempered alloy steel heavy hex nuts
7M Quenched & tempered alloy steel heavy hex nuts
8 Stainless AISI 304 heavy hex nuts
8M
Stainless AISI 316 heavy hex nuts
 
     

Mechanical Properties Grade Identification Markings

 

Grade Identification Marking5 Specification Material Nominal Size, In. Tempering Temp. °F Proof Load Stress, ksi Hardness Rockwell See Note
Min Max
  ASTM A194 Grade 2 Medium Carbon Steel 2001-4-4 1000 150 159 352 1,2,3
  ASTM A194 Grade 2H Medium Carbon Steel, Quenched and Tempered 2001-4-4 1000 175 C24 C38 1,2
  ASTM A194 Grade 2HM Medium Carbon Steel, Quenched and Tempered 2001-4-4 1000 150 159 237 1,2,3
  ASTM A194 Grade 4 Medium Carbon Alloy Steel, Quenched and Tempered 2001-4-4 1100 175 C24 C38 1,2
  ASTM A194 Grade 7 Medium Carbon Alloy Steel, Quenched and Tempered 2001-4-4 1100 175 C24 C38 1,2
  ASTM A194 Grade 7M Medium Carbon Alloy Steel, Quenched and Tempered 2001-4-4 1100 150 159 237 1,2,3
  ASTM A194 Grade 8 Stainless AISI 304 2001-4-4 - 80 126 300 4
  ASTM A194 Grade 8M Stainless AISI 316 2001-4-4 - 80 126 300 4

 

NOTES:

1. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock, the nut must additionally be marked with the letter B. The letters H and M indicate heat treated nuts.

2. Properties shown are those of coarse and 8-pitch thread heavy hex nuts.

3. Hardness numbers are Brinell Hardness.

4. Nuts that are carbide-solution treated require additional letter A - 8A or 8MA.

5. All nuts shall bear the manufacturer’s identification mark. Nuts shall be legibly marked on one face to indicate the grade and process of the manufacturer. Marking of wrench flats or bearing surfaces is not permitted unless agreed upon between manufacturer and purchaser. Nuts coated with zinc have an asterisk (*) marked after the grade symbol. Nuts coated with cadmium shall have a plus sign (+) marked after the grade symbol.

6. Other less common grades exist, but are not listed here.


For more information,
talk to me online!
点此可以免费打电话给卖家,沟通更快速。
  TEQ FASTENER
About Us | Products | Standard | Expansion Bolt | Hex Bolt | Hex Nut | Wedge Anchor | Tapping Screw
TEL: 0086-574-88138545  FAX: 0086-574-88138343  EMAIL: sales@wdfastener.com
Copyright © 2008 Ningbo Jiangdong TEQ Imp.&Exp. Co., Ltd.  ICP 11010720